Polaris 4500 PRO HD Manual page 9

11. REINSTALL SEAT.
a. Lift the driver side seat latch
seat bottom and firmly press down on seat
bottom to reinstall the driver seat
installed, pull forward on the seat back to
ensure the seat is fully latched and secured
into position.
12. REINSTALL WINCH COVER.
a. Reinstall lower front winch cover
previously removed four push pin rivets
13. REINSTALL HOOD.
a. Place hood into position and rotate the two
hood latches to secure into position.
A
located behind
B
. Once
A
with the
B
.
Instr 9929140 Rev 01 2018-08
14. OPTIONAL STEP - INSTALL WIRELESS
REMOTE.
a. Wireless remote holder can be installed in
desired location on vehicle. Use screws
supplied in the wireless remote kit for holder
installation. Location shown is for
REFERENCE ONLY.
15. VERIFY WORK.
a. Confirm all electrical wires/connections have
been routed and connected per instructions.
b. Confirm that there are no exposed wires or
terminals.
c. Ensure all loose wires are secured away from
moving parts, sharp edges and heat sources.
Page 9 of 17