Advertisement
Features and parts
Due to technological innovations, the product descriptions in this manual may not be completely consistent with
your refrigerator. Detailed information is in accordance with the final product.
II.
Preparations for use
Installation location:
1.
Ventilation condition
The position you select for the refrigerator installation should be well-ventilated and has less hot air. Do not locate the unit
near a heat source such as cooker, and avoid it from direct sunlight, thus guaranteeing the refrigerator effect while saving
energy consumption. Do not locate the refrigerator in the damp place, so as to prevent it from rusting and leaking
electricity. The result of the total space of the room in which the unit is installed being divided by the refrigerant charge
amount of the unit shall not be less than 8 g/ M
Note: The amount of refrigerant charged for the unit can be found on the nameplate.
2.
Heat dissipation space
When working, the unit gives off heat to surroundings. Therefore, at least 300mm of free space should be spared at the
top side, more than 100mm on both sides, and above 50mm at the side of the refrigerator.
Dimensions in mm:
W
D
604
671
Fig. 1
Note：Figure 1, Figure 2 only illustrate the space demand of the product.
3.
Level ground
Place the refrigerator on the solid and flat ground (floor) to keep it stable, or else, it will give rise to vibration and noise.
When the refrigerator is placed on such flooring materials as carpet, straw mat, polyvinyl chloride, the solid backing plates
should be applied underneath the unit, so as to prevent color change due to heat dissipation.
3
.
H
A
1520
1003
Fig. 2
B
E
C(°)
1141
50
130±5
F
100
Hide quick links:
Advertisement
