Advertisement
of power supply or failure of the refrigerating system).
•Try to open the refrigerator door as least as possible, this way food can safely and freshly be kept for hours even in hot
summer.
•If you get the power outage notice in advance：
1)
Adjust the thermostat knob to the high mode an hour in advance, so that foods get fully frozen (Do not store new
food during this time!). Restore the temperature mode to the original setting when power supply becomes normal in a
timely manner.
2)
You can also make ice with a watertight container, and put it in the upper part of the freezer, so as to extend the time
for fresh food to be stored.
Defrosting
This appliance is designed with automatic defrosting function, thus no need to defrost it manually.
Changing the lamp
The LED lamp is used by the refrigerator for lighting, which features low energy consumption and long service life. In case
of any abnormality, please contact the after-sales personnel service.
How to disassemble the parts.
Fridge door bottle rack:
Hold the bottle rack with both hands, and then push it up.
Fridge shelf:
Hold one end of the shelf, and lift it up while pulling it outwards.
VII.
Simple fault analysis and elimination
You can solve many common refrigerator problems easily, saving you the cost of a possible service call. Try the
suggestions below to see if you can solve the problem before calling for service.
Case
·Completely non-
refrigeration
·Abnormal noise
·Poor refrigerating
efficiency
·Peculiar smell in
refrigerator
Fridge light Out;
Refrigerator
not
cooling;
Compressor
fault
with "Fast Cool"
indicator
light
flashing;
Inspection
•
Power source connected is OK？
•Are breakers and fuses broken?
•No electricity or line trip?
•Is refrigerator stable?
•Does refrigerator contact the wall?
•Do you put hot food or too much food?
•Do you open the door frequently?
•Do you clip food bag to the door gasket?
•Direct sunlight or near a furnace or stove?
•Is it well-ventilated?
•Temperature setting in too high?
•Any spoiled food?
•Do you need to clean refrigerator?
•Have you packed food of strong flavors?
Is there a door open alarm? Has the door been
open for more than 10 minutes?
Are indicator lights "4" and "3" flashing? Is the
'standby' function activated?
Does the battery have sufficient electricity?
Solutions
•
Refer to the wiring diagram, check the power wiring
connection.
•Opening the door and checking whether the lamp is lit.
• Check fuse
•Adjusting refrigerator's leveling feet.
•Off the wall.
•Putting food into refrigerator when hot food becomes
cool.
•Checking and closing the door.
•Removing the refrigerator from the heat source.
•Emptying the distance to maintain good ventilation.。
•Setting to the appropriate temperature.
•Throwing away spoiled food.
•Cleaning refrigerator.
•Packing food of strong flavors.
If there is a door open alarm, close the door, and open it
again after 5s, observing whether the fridge LED light
turns on.
Press the corresponding key to exit the 'Standby'
function.
1) Enter the Battery Test program to observe whether
the battery level is less than 10V (if the battery power
ever falls below 9V, it may lead to the compressor
undervoltage protection), and charge or replace the
battery if necessary.
2) If the battery level is high (above 11V), or the battery
with sufficient power has been replaced, wait for 5
minutes to observe whether it can return to normal; if
not, please contact the after-sales personnel for service.
Hide quick links:
Advertisement
