Waves BSS DPR-402 User Manual page 8

RATIO
Determines the ratio of compression, expansion or de-essing, depending on the selected Mode
and Jumper settings.
Range: Out (1:1) to inf:1 in 0.1:1 increments
Default: 4:1
Reset: Out (1:1)
MODE
Determines the function of the dynamic processing operation.
1. COMPRESS – Broadband compression
2. DE-ESS Wide – Assigns Thresh/Ratio/Attack/Release controls to broadband de-essing.
The DE-ESS control is inactive in this mode.
3. DE-ESS HF – Assigns Thresh/Ratio/Attack/Release controls to frequency-specific
de-essing. De-ess and Peak Limiter controls are inactive in this mode.
ATTACK
Determines the attack time of the compression, expansion, or de-essing, depending on the
selected Mode and Jumper settings.
Range: 50 µs to 100 ms in 11 predetermined states
Default: 1 ms
Reset: 50 µs
RELEASE
Determines the release time of the compression, expansion or de-essing, depending on the
selected Mode and Jumper settings.
Range: 5 ms to 4 sec., or Auto for program-dependent Attack and Release times.
The ATTACK control is inactive in this mode.
Default: 100 ms
Reset: 5 ms
Waves BSS DPR-402
User Guide
8