Graphic Whizard PT 335B Multi Operator's Manual page 19

With Progressive Crease function is activated and all input is completed, the screen will jump to the main
operation mode. But the screen is different, and it has only 1 page as follows:
Press M, go to MODE 5. Press M again, go to MODE 6.
MODE 5 Feed Mode
The user can choose Auto feeding mode or Manual feeding mode. Press 1 to choose Auto or 2 to choose
Manual. The chosen mode has a '*' symbol beside it. Press Enter to select mode.
In Auto Mode, put a thick stack of stock on the loading table. Press the START button. The loading table will
rise. After the top paper touches the stack height sensor, the feeding system will begin.
In Manual Mode no stock is placed on the loading table. After the START button is pressed the table will rise
and will stop after the stack height sensor is triggered. Stock can now be fed sheet by sheet into the machine
under the friction of the belt.
Press M button 3 times to go to MODE 4. Press 4 times and to go to Mode 5.
MODE 6 to Recall Job and MODE 6 to Save Job
Frequently used crease data can be saved and recalled, so that the user does not need to have to input data
each time. The system memory holds up to 30 jobs.
18