Advertisement
Quick Links
Motion Sensor Battery Replacement Instructions
«
Help Center
Motion Detector Battery Replacement
Wireless motion detectors require battery replacement periodically. A low battery is indicated by a trouble
condition on your system keypad.
Changing the battery in your motion detector is quick and easy. If you have your replacement battery ready to
go, you can follow these step-by-step instructions.
If you are not sure which battery you need, visit our
Step-by-Step Instructions
To replace your motion detector battery:
1. Locate the zone where the low battery signal is coming from. Most systems will display a trouble
condition and a zone number on the keypad.
2.
Put your system in test
second intervals.
https://alpha.adt.com/help/94[11/12/2018 10:02:05 PM]
Instructions
mode. This will result in a brief siren and beeping from your panel in 30-
Select
peripheral battery
replacementpage to find out.
Related Topics
Advertisement
Related Manuals for ADT Ademco 5898
Summary of Contents for ADT Ademco 5898
- Page 1 1. Locate the zone where the low battery signal is coming from. Most systems will display a trouble condition and a zone number on the keypad. Put your system in test mode. This will result in a brief siren and beeping from your panel in 30- second intervals. https://alpha.adt.com/help/94[11/12/2018 10:02:05 PM]...
- Page 2 5. Wait at least 30 seconds before inserting the new battery. Pay close attention to the direction of the (+) and (-) signs to ensure proper installation. 6. Replace the cover of the device by lining up the hooks on the short end of the device with the base https://alpha.adt.com/help/94[11/12/2018 10:02:05 PM]...
- Page 3 Motion Detector Troubleshooting Here are instructions for troubleshooting problems with your motion detector Peripheral Device Manuals Here you will find the manuals for several motion detector models Return to Top How can we help? Search https://alpha.adt.com/help/94[11/12/2018 10:02:05 PM]...