1E1T1-M/2E1T1-M-1/2 Port-Channelized E1/T1/Pri/Ve1 Multifunctional Interface Card - Huawei AR1200 Series Hardware Description

Huawei AR1200&2200&3200 Series Enterprise Routers
Hardware Description
Interface Attributes
Table 5-28 Attributes of 10BASE-TX/100BASE-TX electrical interfaces
Item
Connector type
Interface attribute
Standards
compliance
Frame format
Network layer
protocol
Technical Specifications
Table 5-29
Table 5-29 Technical specifications of the 2FE
Item
Dimensions
(depth x width x
height)
Maximum power
consumption
Weight
5.5.3 1E1T1-M/2E1T1-M-1/2 Port-Channelized E1/T1/PRI/VE1
Multifunctional Interface Card
The 1E1T1-M/2E1T1-M is the E1/T1/PRI/VE1 processing unit on the AR routers and provides
one or two E1/T1/PRI/VE1 interfaces. Primary Rate Interface (PRI) indicates ISDN primary
rate interfaces.
Issue 03 (2012-04-20)
Description
RJ45
MDI/MDIX
NOTE
l The interfaces of most network cards are medium dependent interfaces
(MDIs).
l MDIX interfaces are usually used on hubs or LAN switches.
IEEE802.3, IEEE802.3u, IEEE802.3ab
Ethernet_II, Ethernet_SAP, or Ethernet_SNAP
IP
describes the technical specifications of the 2FE.
Specification
223.5 mm x 100.1 mm x 19.82 mm (8.8 in. x 3.94 in. x 0.78 in.)
3.01 W
0.3 kg (0.66 lb)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Cards
76