Xerox Nuvera Ea/Mx Perfecting Production System - Xerox Nuvera 100 Getting Started Manual

Xerox Nuvera
Xerox Nuvera EA/MX Perfecting
Production System
Use the following diagram to become familiar with basic components of a Xerox Nuvera
EA/MX Perfecting Production System. Configurations vary according to modules installed on
the system.
One or Two Feed
Control Console
Modules
The mouse-driven user
Stock feeds from 2-
interface allows you to
Tray or 4-Tray feed
program jobs and
modules. The 4-Tray
manage the system.
feed module can
also be configured
as an optional post
fuser Insertion
Module.
Dual Print Engines Sheet Enhancement
Module (SEM)
The print engines
contain xerographic The SEM removes curl
components that
from sheets.
produce 288 images
per minute (IPM)
with duplex printing
and 144 IPM with
simplex printing.
Getting Started Guide
DVD-RW Drive
The DVD-RW drive
allows you to print files
from a CD or DVD and
also save jobs to a CD
or DVD.
Finishers
Available modules include:
Optional
•
Insertion Module
•
A 2-Tray or 4-Tray
feed module
•
serves as an
insertion module,
allowing you to
insert pages after
•
the fusing
operation.
Introduction
Optional DS3500
The DS3500 serves as
the interface between
the Xerox Nuvera
printer and a DFA
compatible inline
finisher. The DS3500
can also stack.
Basic Finisher Module with Top
Tray
Basic Finisher Module Plus
(Bypass Unit)
Basic Finisher Module Plus
(Top Tray with DFA Direct
Connect)
Xerox Tape Binder
–
Multifunction Finisher (MFF)
DFA-compliant inline
–
finishers
Xerox Tape Binder
–
High capacity stackers
–
1-3