Yamaha DRIVE2 AC 2019 Owner's/Operator's Manual page 50

MAINTENANCE
1
2
3
4
5
6
7
8
9
10
11
8-23
Replacing a Headlight
Bulb
If the headlight burns out, replace it
as follows:
1. Disconnect the wire connector
1
1 from the headlight assembly.
2. Remove the three screws 2
and remove the light control unit.
Y-2767
3. Remove the four screws 3 to
remove the headlight assembly
from the holder.
4. Remove the headlight assembly
from the holder.
5. Install new headlight assembly
into holder and secure with the
four screws.
6. Install the light control unit and
fasten with three screws.
7. Connect the wire connector to
the headlight assembly.
Y-2768
Y-2769
J0E