Yamaha DRIVE2 AC 2019 Owner's/Operator's Manual page 19

OFF ON
BAR LEVEL
VOLT 48.95 47.8 47.4 46.9 46.4 46.0 44.8 44.0 43.5
OFF ON
BEEP
J0E
BATTERY
Y-2842
9 8 7 6
BATTERY
Y-2843
Y-2844
CONTROLS
As the battery energy decreases,
the LEDs will move to the left toward
the "E." When the LED light below
the "E" is the only one lit, the
batteries must be charged.
Use the table to determine the
remaining battery capacity. For
example, if 7 of the 9 LED lights are
lit, batteries still have approximately
47.4 volts left. When the batteries fall
to 43.4 volts or less, 1 LED will blink
on and off, meaning the batteries
should be charged immediately.
5 4 3 2
DRIVE SELECT SWITCH
The drive select switch is used to
shift the PTV into forward or reverse.
After coming to a complete stop, move
the switch to the desired position.
Switch Position
FWD
REV
TIP
The reverse alarm will sound when
the drive select switch is depressed
to the "REV" position.
1 1 BLINK
43.4 >
Car Movement
FORWARD
REVERSE
5-3
1
2
3
4
5
6
7
8
9
10
11