Toyota Prius 2014 Quick Start Manual page 7

Hide thumbs Also See for Prius 2014:

2014 Prius Pre-Delivery Service (PDS)

Final Inspection & Cleaning

1. Remove interior protective covers, unnecessary labels, tags, etc. (Remove protective covers

just before delivery to customer.)

Remove plastic covers from door panels, seats, head restraints, and sun visors, as required.

Remove labels, tags, and stickers (except those containing owner information).

NOTE

Customer information labels, such as the fuel caution, airbag warnings, and bumper labels,

MUST be left on the vehicle until delivery to a retail customer.

2. Visually inspect all interior parts for installation, damage, ﬁt, dirt, etc.

3. Verify ﬂoor mat application and install using retaining clips* –

4. Verify green light is illuminated on SOS (Safety Connect) button*

NOTE

Vehicle may arrive with hanger requesting inspection to Safety Connect system. If system is

working properly and green light is illuminated, disregard hanger.

5. Remove Rapgard™ and clear protective bumper ﬁlm*

Ensure that ALL glue residue is removed.

6. Wash and clean vehicle

7. Inspect paint ﬁnish for scratches, chips, rust, dents, damage, etc.

8. Place oil change sticker on inside of windshield, top left corner

Complete the mileage or date recommendation and apply the oil change reminder sticker to the

inside of the windshield, top left corner. You may use your current oil change reminder sticker.

9. Inspect exterior body parts for proper installation, damage, rust, etc.

10. Install front license plate and mounting bracket* –

11. Place Owner's Guide and ﬁrst aid kit portfolio* in glove box

12. Perform Techstream Health Check

Perform Health Check to ensure that diagnostic trouble codes are not present. Health Check

results can be printed for the customer at delivery, or for the dealer ﬁle, using the Diagnostic

Report function.

* Inspect or install when equipped or required

T-SB-0158-13

October 16, 2013

see check sheet

Page 7 of 7

T-SB-0023-13