Toyota Prius 2014 Quick Start Manual page 5

2014 Prius Pre-Delivery Service (PDS)
Under Hood
1. Check engine oil level
2. Check brake fluid level
Visually inspect using see-through reservoir.
3. Check engine coolant level
4. Check inverter coolant level
5. Check windshield washer fluid level
6. Inspect for fuel, oil, coolant, and other fluid leaks
Battery Maintenance
1. Perform HV battery check and maintenance –
Under Vehicle (On Hoist)
1. Remove disc brake anti-rust covers/anti-corrosion wheel film* –
Visually inspect rotors for rust.
NOTE
For best rotor rust prevention, retain wheel film on vehicle until just prior to customer delivery.
2. Inspect tires for defects/damage
3. Activate and Initialize Tire Pressure Warning System (TPWS) –
4. Install wheel caps*
5. Install front spoiler under cover and rear side spoilers –
6. Inspect for fuel, oil, coolant, and other fluid leaks
7. Inspect under the vehicle for damage, rust etc.
8. Visually check bolts and nuts on chassis and powertrain for looseness
9. Install rubber body plugs (stored in glove box or console)*
10. Check hybrid transaxle fluid
T-SB-0158-13
© 2013 Toyota Motor Sales, USA
October 16, 2013
T-SB-0027-13
T-SB-0154-13
Page 5 of 7
PD017-04
see check sheet