Table of Contents
Advertisement
CONTROLS
LIGHT CONTROLS
1
AUTO: Rotate the end of the lever to set
your headlights to automatically turn on
or off, depending on the level of light
outside.
NOTE: The sensitivity of the automatic
headlights can be adjusted through the
®
STARLINK
multimedia display.
2
Parking Lights: Rotate the end of the
lever to turn on the instrument panel
lights, parking lights, side marker lights,
tail lights, and license plate lights.
3
Headlights: Rotate the end of the lever to turn on the headlights, instrument panel
lights, parking lights, side marker lights, tail lights, and license plate lights.
4
High Beams: Push the lever forward to change from low beam to high beam. When
set to the "AUTO" position, pushing the lever forward also activates the High Beam
Assist (HBA) system. Pull the lever back to center to return to low beam.
5
Fog Lights: If equipped, rotate the dial to turn on the fog lights when the headlights
are on low beams in the "
Illumination Brightness
When the light controls are on (in
the
,
, or "AUTO"
position), and ambient light is low,
rotating the illumination
brightness dial on the instrument
panel upward will make the
instrument panel illumination
brighter. When the dial is fully
rotated upward (dots aligned), the
instrument panel illumination
stays at full brightness. Rotating
the dial downward dims the
instrument panel illumination.
When the ambient light is bright,
the illumination brightness is set
to the maximum regardless of the position of the control dial.
32
" or "AUTO" position.
Illumination Brightness Dial
Advertisement
Table of Contents
