Subaru Legacy 2021 Getting Started Manual page 28

Hide thumbs Also See for Legacy 2021:
Table of Contents

Advertisement

GETTING COMFORTABLE
16
Passengers's Climate Button: Select
the Passenger's Climate Button to adjust
the air temperature, turn the
heated/cooled seats on or off, or to
SYNC (15) the passenger's side air temp
with the driver's temperature.
17
Passenger Heated Seat Button: Select
this button to turn on the heated
passenger's seat. Each time you press
the button, the mode will change as
follows: High, Mid, Low, Off. Yellow
indicators will illuminate indicating the
level.
18
Passenger Vented Seat Button: Select
this button to turn on the ventilated
passenger's seat. Each time you press
the switch, the mode will change as
follows: High, Mid, Low, Off. Blue
indicators will illuminate indicating the
level.
Auto Mode
When using automatic mode, the fan speed, airflow distribution, air-inlet control and air
conditioning compressor are controlled automatically. To activate:
1. Press the "AUTO" button. The "FULL AUTO" indicator light illuminates on the climate
control display.
2. Set the preferred temperature using the temperature control arrows, or select the
climate control button and use the touch buttons or slide bar to adjust the temperature.
If you operate any of the buttons other than "ON/OFF", rear window defogger, front
defroster, "SYNC", or the temperature buttons, the "FULL" indicator light will turn off, the
"Auto" will display in the screen button. You can then manually control the system as
desired. Press the "AUTO" button to change back to "FULL AUTO" mode.
26

Advertisement

Table of Contents
loading

Table of Contents