Configuring The Initial Settings; Specifying The Network Settings - Canon imageRUNNER 1643iF II Setup Manual

Configuring the Initial Settings

Specifying the Basic
1
En
Settings
When you turn on the machine for the first time, the
Setup Guide starts up on the operation panel. Perform
Es
the initial machine setup by following the on-screen
instructions.
Pt
1.
Select the language, then the country/
region and finally the time zone.
2.
Set the current date/time.
Specifying the Security
2
Settings
Specify the basic security settings to prevent unauthorized
access to the machine.
1.
To use the Remote UI, select <Yes>.
To continue without using the Remote UI, select
<No> and proceed to step
2.
To use System Manager mode, select <Yes>.
• Set the System Manager ID and PIN so that you
can configure the settings for extended functions
and the management of access privileges, etc.
• To continue without using System Manager
mode, select <No> and proceed to step 5.
3.
Set the System Manager ID.
Enter any number and then select <Apply>.
Operation panel
.
3
4.
Set the System Manager PIN.
• Enter any number and then select <Apply>.
• Re-enter the same PIN on the next screen as
confirmation and select <Apply>.
5.
To use General User mode, select <Yes>.
• Set the PIN to be used by general users to access
the Remote UI.
• To continue without using General User mode,
select <No> and proceed to step
6.
Set the Remote UI Access PIN.
• Enter any number and then select <Apply>.
• Re-enter the same PIN on the next screen as
confirmation and select <Apply>.
Specifying the Network
3
Settings
Specify the settings for connecting the machine to a
network. Before proceeding, check that the computer and
router are correctly connected to the network.
Wireless LAN
1.
Check the router's "SSID" and "Network
key."
SSID
: XXXXXXXXXXXX
Network key
: XXXXXXXXXXXX
2.
To configure the settings, select <Yes> on
the operation panel.
3.
Check the message and select <OK>.
4.
Select the network with a matching SSID.
5.
Enter the password (network key) and
select <Apply>.
2
.
3