Panasonic CZ-RTC6BL Installation Instructions Manual page 4

 This remote controller must be installed by the sales dealer or installer.
 When installing the remote controller, use appropriate protective equipment and tools
for safety.
 This remote controller should be securely installed in accordance with the Installation
Instructions.
 Electric work must be performed by authorised personnel in accordance with the local
regulations and in accordance with the Installation Instructions.
 To avoid malfunctions caused by radio wave interference, keep the remote controller
away from devices such as other wireless device, microwaves and the device that
use 2.4 GHz signal. Depending on the area, the module may not be available.
 Attach the electrical cover to the indoor unit securely.
 Make sure to connect the remote controller to the P.C. board and terminal board of
the indoor unit properly.
 Do not set up in hospitals or places where electronic medical devices are located.
 If you have a cardiac pacemaker or implantable cardioverter defi brillator, please keep
at least 15 cm away from the remote controller.
 Do not use the remote controller near to automatic control equipment (automatic door,
fi re alarms, etc.).
 In case of an abnormal condition (such as a burning smell), stop the indoor unit and
turn the breaker OFF.
 Do not operate with wet hands.
 Do not splash water on the remote controller or use it in the bathroom.
 Ground yourself to discharge static electricity before performing any wiring.
 Do not install the remote controller in places with direct sunlight or where the ambient
temperature is 40 ˚C or more or is 0 ˚C or less. Follow specifi cations. (P.9)
 The connecting cable must not touch piping directly.
 Do not set up where children can reach the remote controller.
 Do not stand on an unstable surface when operating or checking the remote controller.
 Do not use in special environments.
Use in places with much oil (including machine oil), steam, fl ammable or corrosive
gas, voltage fl uctuation, surrounding the metal body, may lead to severe decrease in
functionality and damage to parts.
 Do not use the remote controller nearby other wireless devices, microwaves, cordless
phones, or facsimiles.
4
WARNING
CAUTION