1. Introduction 1.1 Overview The XAiOX Wonde-X GPS Receiver is a Global Position System Receiver with Bluetooth wireless technology. This BT GPS receiver allows you to receive GPS data on mobile handhelds wirelessly. By sending >GPS position data over Bluetooth, you can position the receiver fort he bet possible reception all without wires.
User’s Manual XAiOX Wonde-X Bluetooth GPS Receiver - 4 - 1.2 Main Features • 16 Channels ‚All-in-view’ Tracking. • Cold/Warm/Hot Start Time: 60/38/12 Seconds • Re-Acquisition Time: 0,1 second • Supports Standard NMEA-0183 at 9600 bps baud rate • Compatible with Bluetooth Devices with Serial Port Profile (SPP) •...
User’s Manual XAiOX Wonde-X Bluetooth GPS Receiver - 7 - 3. Hardware Description The Bluetooth GPS Receiver has two LED lights. LED1 shows Power and SAT reception. LED2 shows Bluetooth connection. Status-Tabelle Colour Status LED1 RED (permanent light) Power on – No or bad Satellite reception...
User’s Manual XAiOX Wonde-X Bluetooth GPS Receiver - 9 - 5. Software Installation – Pocket PC CE Example: iPAQ Bluetooth with Pocket PC Software <1> Turn Bluetooth ON <2> Click ‚Connect!’ Select ‚Bluetooth Manager’...
Page 10
User’s Manual XAiOX Wonde-X Bluetooth GPS Receiver - 10 - <3> Select ‚Explore a Bluetooth device’ <4> Select <No device selected>, Then click ‘Next’. then click ‚Next’.
Page 11
User’s Manual XAiOX Wonde-X Bluetooth GPS Receiver - 11 - <5> Click ‚BT-GPS’ . <6> Select ‚SPP slave’, If you are asked to enter a then click ‚Next’. password, type ‚0000’.
Page 12
User’s Manual XAiOX Wonde-X Bluetooth GPS Receiver - 12 - <7> Click ‚Finish’. <8> Tap the Bluetooth icon again and BT-GPS connection is now select ‘Bluetooth setting’. established successfully.
Page 13
User’s Manual XAiOX Wonde-X Bluetooth GPS Receiver - 13 - <9> Settings for TomTom Navigation Software. You can use any free Serial COM Port (outgoing)