Advertisement
Available languages
Available languages
CD Disc mode
During playback press the PLAY MODE button once, the display shows "REP". The current track will be played
repeatedly.
When pressing the PLAY MODE button a second time, the display shows "REP ALL". All tracks will be played repeatedly.
When pressing the PLAY MODE button a third time, the display shows "RAND". All tracks will be played in random
sequence.
When pressing the PLAY MODE button a fourth time, the unit will resume to normal playback.
MP3 Disc or MP3 USB mode
During playback press the PLAY MODE button once, the display shows "REP". The current track will be played
repeatedly.
When pressing the PLAY MODE button a second time, the display shows "REP ALBUM". All tracks in the current folder
will be played repeatedly.
When pressing the PLAY MODE button a third time, the display shows "REP ALL". All tracks will be played repeatedly.
When pressing the PLAY MODE button a fourth time, the display shows "RAND". All tracks will be played in random
sequence.
When pressing the PLAY MODE button a fifth time, the unit will resume to normal playback.
Note:
-
For MP3 playback, there is a limitation of 99 folders with a maximum of 999 files the unit could support.
Programmed Playback
This unit can be programmed to play any sequence of up to 20 tracks.
In stop mode press the PLAY MODE button. "P01" is shown.
1.
2.
Press the NEXT or PREVIOUS button to select correct folder (available for MP3 tracks only).
3.
Press the NEXT or PREVIOUS button to select the desired track.
4.
Press the PLAY MODE button to save the desired track.
5.
Repeat steps 2-4 to program up to 20 tracks on a CD (99 tracks in MP3)
6.
Press the PLAY/PAUSE button to play according to the programmed track.
7.
To clear program play press the STOP button twice or change to another mode.
During program play you can also do the "Repeat One" or "Repeat All" operation. But during program play, random
8.
play is not supported.
7. BLUETOOTH
Please follow the pairing instructions below to link the unit to your Bluetooth device.
Slide the FUNCTION switch to the "CD/AUX/USB/BT" position.
1.
2.
Press & hold the PLAY/PAUSE button to change it to USB mode. Now press & hold the PLAY/PAUSE button again
to further change it to Bluetooth mode. The display will show "bt".
If the unit has never been paired with a Bluetooth device before or cannot find the last paired device, the flashing "bt"
3.
on the LCD indicates it is in searching mode. Turn on the Bluetooth function of your Bluetooth device and enable the
search until "Lenco SCD-550" is found. Select "Lenco SCD-550" on the Bluetooth device to make connection. Enter
the pass code "0000" if required.
After successfully paired the unit's display will show "bt".
4.
5.
You can now start playing music from your Bluetooth device wirelessly to the speaker.
6.
You can press the PLAY/PAUSE button on the unit to pause or resume the playback.
7.
You can press the SKIP buttons on the unit to skip to the next song or go back to the previous song.
Notes:
9
Advertisement
