Summary of Contents for MTHTrains Bay Window Caboose
Page 1
ELECTRIC TRAINS, INC. 7020 Columbia Gateway Drive Columbia, MD 21046-1532 www.mth-railking.com The Premier Bay Window Caboose offers a new level of excitement and realism for your O Gauge model railroad. Constructed from sturdy ABS plastic, the Bay Window Caboose was created from quality components and has been designed for years of operation.
Page 2
NSTRUCTIONS STEP To replace the interior light bulbs, follow these steps. 1) To remove the shell from the chassis, remove the four mounting screws located underneath the STEP trucks. 2) With the four screws removed, lower the chassis from the shell, take care not to pull the wires out.
Page 3
STEP 3) To be able to separate the interior from the shell you need to remove the step platform from both ends. In order to do this you need to loosen the Ladder from the Catwalk. You must do this carefully so that you don't scratch the paint on the roof of the caboose.
Page 4
STEP Unplug the red LED’s from underneath the interior STEP There will be two spots of hot End posts glue holding the LEDs in place. of the shell Use a screw driver to loosen the wires from the spots of glue. The end windows will also need to be removed.
Page 8
How to Get Service Under the Terms of the Limited One-Year Warranty For warranty repair, do not return your product to the place of purchase. Instead, follow the instructions below to obtain warranty service, as our dealer network is not prepared to service the product under the terms of this warranty.
This manual is also suitable for:
20-9109720-9104520-9107120-9109120-9107220-91037...
Show all
Need help?
Do you have a question about the Bay Window Caboose and is the answer not in the manual?
Questions and answers