Summary of Contents for MTHTrains RailKing Steel Caboose
Page 1
ELECTRIC TRAINS. 7020 Columbia Gateway Drive Columbia, MD 21046-1532 www.mth-railking.com The RailKing Steel Caboose offers a new level of excitement and realism for your O Gauge model railroad. Constructed from sturdy ABS plastic, the Steel Caboose was created from quality components and has been designed for years of operation.
Page 2
NSTRUCTIONS To replace the interior light bulbs, follow these steps. STEP Remove these four screws STEP 1) To remove the shell from the chassis, remove the four mounting screws located underneath the trucks. STEP STEP 2) With the four screws removed, lower the chassis from the shell, take care not to pull the wires out.
Page 3
STEP STEP 3) To be able to separate the STEP interior from the shell you need to remove the step platform Ladder from both ends. In order to do this you need to loosen the Ladder from the Catwalk. You must do this carefully so that you don't scratch the paint on the roof of the caboose.
Page 4
STEP Unplug the red LED's from underneath the interior. There will be two spots of hot End posts STEP Wires should be glue holding the LEDs in place. of the shell tucked behind these Use a screw driver to loosen clips upon re-assembly the wires from the spots of glue.
Page 8
SERVICE & WARRANTY INFORMATION How to Get Service Under the Terms of the Limited One-Year Warranty For warranty repair, do not return your product to the place of purchase. Instead, follow the instructions below to obtain warranty service as our dealer network is not prepared to service the product under the terms of this warranty.
Need help?
Do you have a question about the RailKing Steel Caboose and is the answer not in the manual?
Questions and answers