Table of Contents
Advertisement
Quick Links
- 1 Instruction Manual
- 2 O-Gauge Installation
- 3 Installing the Dcs Remote Commander and Connecting Power
- 4 Operation Buttons Using the Remote Control
- 5 Freight Yard Sounds (Fys)/Passenger Station Announcements (Psa)
- 6 Reset to Factory Default
- 7 Dcs Remote Commander Troubleshooting Guide
- Download this manual
Advertisement
Table of Contents
Related Manuals for MTHTrains dcs remote commander
Summary of Contents for MTHTrains dcs remote commander
-
Page 1: Instruction Manual
Instruction Manual PLEASE READ THE MANUAL BEFORE USE AND SAVE WWW.MTHTRAINS.COM... -
Page 2: Table Of Contents
Table of Contents Installing the DCS Remote Commander and Connecting Power ... . . 3 O-Gauge Installation.......... -
Page 3: Installing The Dcs Remote Commander And Connecting Power
AC power supply (Item No. 40-1000A). • Z-500 AC Power Supply • Z-750 AC Power Supply • Z-1000 AC Power Supply To install the DCS Remote Commander and power supply please use the following instructions: 1. Ensure the power supply is unplugged. -
Page 4: Basic Operation
Locomotives will ONLY operate with the DCS Remote Commander if they are set to the factory default settings. If the Factory default settings must be reset, the reset... -
Page 5: Operation Buttons Using The Remote Control
In order to turn the smoke unit off/on you must first disconnect power from the track, manually turn the smoke unit control to the “OFF” or “ON” position, full counter-clockwise or some degree of clockwise position, and reapply power. (Small screwdriver may be required for this operation) DCS Remote Commander... -
Page 6: O-Gauge Operation
Because Proto-Couplers are controlled through the Proto-Sound® 2.0 or 3.0 microprocessor, they do not require an uncoupling track section or modification to your layout to function. You can fire a coupler from neutral or while in motion. DCS Remote Commander... -
Page 7: Rear Coupler
DCS system, DCS Commander, or at your local dealer. Proto-Sound® 3.0 engines built in late 2014 on can be reset with the DCS Remote Commander by pressing the sound button [SND], followed by the direction button [DIR], and lastly [ on –]... -
Page 8: Dcs Remote Commander Troubleshooting Guide
O-GAUGE OPERATION DCS Remote Commander Troubleshooting Guide The following Guide will help you trouble shoot your DCS Remote Commander handheld remote with O-Gauge Engines. Symptom Solution Engine has no sound Ensure SU/SD has been pressed. Press the VOL button then press +... -
Page 9: Service And Warranty
M.T.H. Electric Trains. The manufacture date of an item can be verified on the item's detail page “shipping date field” on the M.T.H. website (www.mthtrains.com). This warranty does not cover damages caused by improper care, handling, or use. Transportation costs incurred by the customer are not covered under this warranty.
Need help?
Do you have a question about the dcs remote commander and is the answer not in the manual?
Questions and answers