Intended Use; Applications - EWM PM 301 W Operating Instructions Manual

Intended use

Applications

3 Intended use
Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and stand-
ards applicable for use in industry and trade. It may only be used for the welding proce-
dures indicated at the rating plate. Hazards may arise for persons, animals and material
objects if the equipment is not used correctly. No liability is accepted for any damages
arising from improper usage!
• The equipment must only be used in line with its designated purpose and by trained or
expert personnel!
• Do not improperly modify or convert the equipment!
3.1 Applications
Welding torch of multi-process welding machines for arc welding covering the following welding proce-
dures:
Machine series
PM 301 - 551 W
PM 551 W Alu
8
Main procedure for MIG/MAG welding
Standard arc
WARNING
Pulsed arc
099-700003-EW501
14.09.2020