Intended Use; General; Applications; Documents Which Also Apply - EWM AMT301G Operating Instructions Manual

3

Intended use

3.1

General

A MIG/MAG welding torch ready for operation consists of: hose package, handle and torch neck, inclu-
ding all necessary accessories and wearing parts.
All elements together form a functional unit which, supplied with the relevant operating materials, genera-
tes an arc for welding. For welding, a wire electrode is fed through the hose package and the welding
torch. The arc and molten pool are shielded using inert gas (MIG) or active gas (MAG).
The wire electrode is a melting solid or cored wire which is fed through the contact tip. The contact tip
transfers the welding current to the wire electrode. The arc is formed between the wire electrode and
workpiece.
Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and stand-
ards applicable for use in industry and trade. It may only be used for the welding proce-
dures indicated at the rating plate. Hazards may arise for persons, animals and material
objects if the equipment is not used correctly. No liability is accepted for any damages
arising from improper usage!
• The equipment must only be used in line with its designated purpose and by trained or
expert personnel!
• Do not improperly modify or convert the equipment!
3.2

Applications

Welding torch for arc welding machines for automated GMAW.
3.3

Documents which also apply

3.3.1

Warranty

For more information refer to the "Warranty registration" brochure supplied and our information regarding
warranty, maintenance and testing at www.ewm-group.com!
3.3.2

Declaration of Conformity

This product corresponds in its design and construction to the EU directives listed in the decla-
ration. The product comes with a relevant declaration of conformity in the original.
The manufacturer recommends carrying out the safety inspection according to national and in-
ternational standards and guidelines every 12 months (from commissioning).
3.3.3

Service documents (spare parts)

No improper repairs and modifications!
To prevent injuries and damage to the machine, only competent personnel (authorised
service personnel) are allowed to repair or modify the machine.
Unauthorised manipulations will invalidate the warranty!
• Instruct competent personnel (authorised service personnel) to repair the machine.
Spare parts can be obtained from the relevant authorised dealer.
099-500061-EW501
30.05.2023
WARNING
WARNING
Intended use
General
11