Download Print this page

Huawei NE20E-S8 Configuration page 8

Hide thumbs Also See for NE20E-S8:

Advertisement

1. Need work with NSP-A/NSP-B
2. Mainly used in IP hard pipe scenario.
o 9.13 10-Port 100/1000Base-X-SFP Physical Interface Card E(PIC-E)
1.NSP-A/NSP-B/NSP-C support this card. If configure with NSP-A/NSP-B/NSP-C, all
the sub-slot can support this card.
2.As this card with ETM chipset(enhanced Qos), it must insert in the slot which
capacity bigger than 10G, or else the card would not registered.
o 9.14 8-Port 100/1000Base-X-SFP Physical Interface Card H
1. Need work with NSP-A/NSP-B/NSP-C
2. Mainly used in IP hard pipe scenario.
100/1000Base-X-SFP Physical Interface Card H
o 9.15 8-Port 100/1000Base-RJ45 Physical Interface Card(PIC)
100/1000Base-RJ45 Physical Interface Card
o 9.16 8-Port 100/1000Base-X-SFP Physical Interface Card
100/1000Base-X-SFP Physical Interface Card
10. ===Low speed Card===
8-Port
8-Port
8-Port

Advertisement

loading