Advertisement
LAN/WAN-SFP+ Physical Interface Card
o 9.6 2-Port 10GBase LAN/WAN-SFP+ Physical Interface Card H
1. Need work with NSP-A/NSP-B
2. Mainly used in IP hard pipe scenario.
o 9.7 2-Port 10GBase LAN/WAN-SFP+ Physical Interface Card H
Specifications: 1)Support IP hard pipe 2)Support interface type:10GE 3)Specifications
list:
http://3ms.huawei.com/mm/docMaintain/mmMaintain.do?method=showMMDetail&f_i
d=CIP180525031314083 Configuration precautions: 1)Need work with NSP-A/NSP-
B/NSP-C.
LAN/WAN-SFP+ Physical Interface Card H
o 9.8 2-Port 10GBase LAN/WAN-SFP+ Physical Interface Card E(PIC-E)
1.Only NSP-A/NSP-B/NSP-C support this card.
If configure with NSP-A/NSP-B, Sub-slots of No.3-No.6 can support this card.
If configure with NSP-C, all slots can support this card.
2.As this card with ETM chipset(enhanced Qos), it must insert in the slot which
capacity bigger than 20G,or else the card would not registered.
o 9.9 1-Port 10GBase LAN/WAN-SFP+ + 8-Port 100/1000Base-X-SFP
Physical Interface Card
This card support GE/10GE auto-sensing.
2-Port 10GBase
2-Port 10GBase
Advertisement
