Download Print this page

Huawei NE20E-S8 Configuration page 15

Hide thumbs Also See for NE20E-S8:

Advertisement

Need to configure this cable, while need to output "2M Primary Clock".
o
17.4 ===RS232/FXS/FXO/E&M port cable===
▪ 17.4.1 Please input the quantity of RS232
MPA board supports RS232/RS485/RS422 interface, MPA board supports a
maximum of two RS232 cable, two RS485/RS422.
▪ 17.4.2 Please input the quantity of FXS/FXO
MPA board supports four FXS/FXO interface,MPA board supports a maximum of
need 4 standard phone lines.
▪ 17.4.3 Need E&M Interface or not
1.MPA board supports 2-channel E&M interface,MPA board supports a maximum of
2 pieces of E&M cable.
2.6 Channels E&M Interface Board supports 6-channel E&M interface,MPA board
supports a maximum of 6 pieces of E&M cable.
▪ 17.4.4 Need lightning arrester or not
Arrester must be configured when unshield cable is used in outdoor.
o
17.5 ===SA8 board cable===
▪ 17.5.1 Please input the quantity of X.21-DTE
SA8 board supports 8-channel X.21 interface,SA8 board must be equipped with an 8
records at most X.21 DTE cable
▪ 17.5.2 Please input the quantity of X.21-DCE
SA8 board supports 8-channel X.21 interface,SA8 board must be equipped with an 8
records at most X.21 DCE cable
▪ 17.5.3 Please input the quantity of V.24-DTE
SA8 board supports 8-channel V.24 interface,SA8 board must be equipped with an 8
records at most V.24 DTE cable
▪ 17.5.4 Please input the quantity of V.24-DCE
SA8 board supports 8-channel V.24 interface,SA8 board must be equipped with an 8
records at most V.24 DCE cable
▪ 17.5.5 Please input the quantity of V.35-DTE

Advertisement

loading