Download
Share
Print this page
E-LOK 8 Series User Manual
  1. Manuals
  2. Brands
  3. E-LOK Manuals
  4. Door locks
  5. 8 Series
  6. User manual

E-LOK 8 Series User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
805 User Manual

Advertisement

loading

Related Manuals for E-LOK 8 Series

Summary of Contents for E-LOK 8 Series

  • Page 1 805 User Manual...

  • Page 2: Summary Check List

    8 - S e r i e s Summary Check List: For further details see pages 8-12 1. Crop out done as per template. 2. Arrow on spindle hub points down. 3. Check rubber gasket installed correctly, with lugs pressed in tight, so proper seal around backplate edge.
  • Page 3 8 - S e r i e s Please Note: Keep the included mechanical keys in a convenient place such as an Elements Hardware 1236 Key Safe Replace the batteries when batteries are low voltage Read this User Manual carefully before installing your 8- Series Smart Lock 1236-BLK Shown:...

  • Page 4: Contents Page

    8-Series Handle Functions Pg 29. Unlock with Mechanical Key Pg 30. E-LOK Gateway Pg. 1 Pg 31. E-LOK Gateway Pg. 2 Pg 32. E-LOK Gateway Pg. 3 Pg 33. E-LOK Gateway additional notes Pg 34. Maintenance Guide Pg 35. Important Notes Pg 36. Contact...
  • Page 5 8 - S e r i e s 8-Series Body Dimensions:...
  • Page 6 8 - S e r i e s Mortice Lock Options: All Mortice templates available online to download at E-LOK.com Back set: 70mm 60mm 74mm 86mm Case Width:...
  • Page 7 8 - S e r i e s 8-Series Packing List: (not included with 805-0) Front Panel Back Panel User Manual Mortice lock QTY 1 QTY 1 QTY 1 QTY 1 Faceplate & Striker Mechanical Key RFID Card Split Pin Screw QTY 4 QTY 3 QTY 3...

  • Page 8: Specifications

    8 - S e r i e s Specifications: Product Name: E-LOK 8-Series Smart Lock Operating Application: E-LOK App Finish: Black Unlock Methods: Pin Code, RFID Card, E-LOK App, Mechanical Key. Max Num. Locks on App: Unlimited Max Num. Pin Codes: 200 Pin codes Max Num.
  • Page 9 8 - S e r i e s Adjusting The Handing: Steps to change handing on E-LOK 8-Series: Locate handing screw as shown on right: Un-do and remove handing screw. Rotate entire lever 180 degrees into opposite position. Re-install handing screw in opposite position.
  • Page 10 If this step is missed and the arrow is pointing; Horizontal: Whilst outside, the deadbolt won't throw when lever is lifted up. Upwards: The E-LOK will appear to stay unlocked permanently. If you are experiencing these symptoms please ensure the...

  • Page 11: Installation

    If you are fitting the 8-Series into a new hole, take the including mortice template and cut the holes into your door. Your E-LOK 8- Series comes with screws to both suit wooden and aluminium doors.
  • Page 12 Step 7. Screw and tighten the inside panel to the outside panel, using the appropriate fixings according to door width. Install Batteries and attached battery cover back in plate. E-LOK 8-Series Smartlock should be ready to go!
  • Page 13 You must be admin + in Bluetooth range of the Smart lock in order to complete factory reset. You can factory reset your E-LOK by going into the lock settings and tapping "Delete". This will fully factory reset the E-LOK smart lock.
  • Page 14 The system reset will be complete. From here you can link the E-LOK smart lock to your phone. Trouble shooting: If you manual reset whilst you were admin of the E-LOK, Transferring Lockset to Trash will complete the reset of the E-LOK:...

  • Page 15: First Setup

    8 - S e r i e s First Set-Up: Get the E-LOK App by visiting E-LOK.com for the app download link 1. Register an account 2. Login to your account. 3. Ensure E-LOK 8-Series is with E-LOK using either on and Bluetooth enabled phone number or email.
  • Page 16 Pin code Management: E-LOK App allows you to set a virtually unlimited amount of pincodes. You can set a range of different types of pincode. The best to use is custom to create yours. Set it to permanent, name it and set your preferred sequence. (4-9 digits).
  • Page 17 RFID Card + Privacy Lock RFID Card Management: E-LOK App allows you to store 200 unique RFID Cards. To set one up of the three included with your E-LOK 8-Series Lockset, tap "IC Cards" on the lock management page, tap the menu on the top right then follow the prompts to add your RFID Card.
  • Page 18 After you've connected your phone to your E-LOK Lockset and connected your E-LOK Gateway, open the lock management page and ensure Unlock Remotely is enable in the settings. Now Tap the Unlock icon. This will unlock your E-LOK via Wi-Fi.
  • Page 19 8 - S e r i e s Admin Passcode + Unlock Records Admin Passcode: E-LOK comes with an admin pass code. To view this tap "Settings" on the lock management page, tap "Basics" and then tap "Admin Passcode". Unlock Records: E-LOK App records what pass codes were used to unlock the E-LOK and when.
  • Page 20 Battery Percentage + Lock Clock: Check Battery Percentage: E-LOK App allows you to check the battery percentage of your E-LOK in two easy ways. In the lock select page, the app will give you a percentage overview to the nearest 5%. You can also find a more accurate battery level in the settings of the lock set.

  • Page 21: Passage Mode

    Passage mode: Passage mode: E-LOK App allows you to manage and control passage mode on your E-LOK 8- Series Lockset. Tap into "Settings", "Passage Mode", then choose the days and hours you want your E-LOK Lockset to be in passage mode. A common application for this is having a Lockset on passage mode Mon-Fri 9am-5pm for an office building.
  • Page 22 Extra Smart Lock settings: Auto Lock: E-LOK App allows you to adjust the auto lock timer on the smart lock. This is the timer that is triggered once the smart lock has been unlocked using any unlock method (exception, is if passage mode is enabled). Auto lock timer is under the lock settings tab.
  • Page 23 Extra Smart Lock settings: Reset Button: With E-LOK App, you can enable or disable the factory reset button inside the battery case. Disabling this reset button will prevent someone from resetting the E-LOK Smart Lock and locking you out (apart from mechanical key). This feature works great on E-LOK's installed on Airbnb's, rentals etc.
  • Page 24 Extra Smart Lock settings: Lock Groups: You can link E-LOK Smart Locks together in lock groups. First create a lock group in the main settings, then link a Smart Lock to the group in the lock settings. View lock groups in the select page.
  • Page 25 Transfer Lockset Ownership: Transferring Lockset ownership can be useful in a few scenarios. What it allows you to do is give Master Admin ownership to another E-LOK App account holder. The process to Transfer Lockset Ownership is shown below: Tap into "Settings" then into "Transfer Lock(s)", here you can select the Locksets you wish to transfer ownership.
  • Page 26 Here's how it works: If you are the account holder that originally set-up your E-LOK 8-Series lock set, then your account is automatically considered the Master Admin for that lock set. You cannot change who the Master Admin is, unless you reset the E-LOK lock set or Transfer Lockset Ownership (as shown before).
  • Page 27 A User only has the App open of unlocking Via Bluetooth and or Unlock Remotely if the lock set has an E-LOK Gateway. Users can be assigned a pin- code, RFID Card or fingerprint unlock by name only and not by account. Either an Admin or the Master Admin can do this.
  • Page 28 Cleaners, Clients and Tenants can be set up with User accounts if they choose to create an E-LOK App account. This would allow them to unlock the lock set via Bluetooth or remotely over Wi-Fi (not advisable due to obvious security reasons).
  • Page 29 Lift up the handle to engage the mortice deadbolt. Pull down to unlock and release latch + deadbolt Important Notes: When the E-LOK 8-Series Automatically locks, the handle disengages from the latch, but you can still lift the handle to...
  • Page 30 8 - S e r i e s Unlocking E-LOK 8-Series with Key The 8-Series smart lock has a mechanical key override to unlock it. Barrel location is under the front panel. Insert one of the included keys, turn and pull handle down to unlock.
  • Page 31 If the E-LOK Gateway is not near one or both, connection may be poor and the E-LOK Gateway may not function as expected. To add the E-LOK Gateway to the E-LOK App follows these steps: Open the left menu on the E-LOK App. Tap "Gateway". Tap "+" Sign. Select "G2"...
  • Page 32 8 - S e r i e s E-LOK Gateway (only if you've purchased the E-LOK Gateway Add-On) Plug in E-LOK Gateway, light should flash red and blue - this means its ready to connect. Tap "Next" then Tap "G2" Configure your network (2.4GHz only), input Wi-Fi password and name the E-LOK Gateway.
  • Page 33 Series. Open your lock management, tap into "Settings", locate the "Unlock Remotely" menu and ensure this is enabled. You will now be able to control your E-LOK 8-Series from the app remotely via Wi-Fi, whether you're at work or out-of-town. You can add, change or delete unlock codes.
  • Page 34 E-LOK Gateway Specs + other info Reset E-LOK Gateway: If you require to factory reset your E-LOK Gateway follow the below process. Removing the Gateway from your app will unlink the Smart Locks that are connected to it. The Smart Locks will work as usual via Bluetooth.
  • Page 35 This will help remove any dust or micro contaminants on the surface. It is also a good idea to do a full factory reset of the E-LOK 8-Series Lockset to ensure software stays light and un-bloated.

  • Page 36: Important Notes

    You can find a link to the app on E-LOK.com The E-LOK App allows you to manage an unlimited amount of E-LOK 8- Series Locksets from your phone. Remember to name each E-LOK 8- Series Lockset uniquely to ensure you don't mix them up.
  • Page 37 8 - S e r i e s Contact: If you run into trouble with your E-LOK Smartlock please visit: E- LOK.com for further information, help and tools. If you don't find your answer on E-LOK.com use the contact box and send us an email.
  • Page 38 8 - S e r i e s Notes:...
  • Page 39 8 - S e r i e s Notes:...
  • Page 40 8 - S e r i e s User Manual E-LOK.com Version: 2103 E8UM...

This manual is also suitable for:

805