Singer SteamWorks Pro Instruction Manual page 3

13. Always turn off, unplug and allow appliance to cool for at least thirty minutes before
14. Do not move appliance without unplugging it.
backwards - doing so may result in hot water discharge.
16. Never yank cord to disconnect from electrical outlet. Instead, grasp plug and pull to
disconnect.
17. USE CAUTION - burns could occur from touching hot parts, or proximity to hot water
or steam. Do not turn unit upside down - there may be hot water in Tank.
18. To reduce likelihood of circuit overload, do not operate another high wattage appli-
ance on the same circuit.
20. Do not allow cord to contact heated surfaces. Do not pull or twist cord. Let appliance
cool completely before storing. Loop cord loosely around appliance when storing.
21. Always put appliance on a secure, level surface, such as a table or counter, when
using.
22. Do not cut or attempt to extend the steam hose or power cord.
23. Before plugging in Steam Press, be sure electrical information on the label agrees
with your power supply. Connecting to the incorrect voltage may cause irreparable
damage to the appliance and will invalidate the warranty.
SAVE THESE INSTRUCTIONS!
FOR HOUSEHOLD USE ONLY
ENGLISH – 3