ledlenser P5R CORE User Manual
Hide thumbs
Also See for P5R CORE:
- Manual (2 pages) ,
- Quick start manual (2 pages) ,
- Quick start manual (2 pages)
Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for ledlenser P5R CORE
Summary of Contents for ledlenser P5R CORE
- Page 1 USER MANUAL P5R CORE P5R WORK...
- Page 2 Therefore, pay particular attention to the warning and safety instructions and properly dispose of the lamp, batteries and packaging material. P5R Core P5R Work User Manual P5R Core | P5R Work V.01 06.2021...
-
Page 3: Table Of Contents
Please register your product with the 12. Further Information enclosed registration card to obtain an extended warranty, check the authenticity of the product and receive updates about products or product improvements. User Manual P5R Core | P5R Work V.01 06.2021... -
Page 4: Scope Of Delivery
P5R Core: 14500 Li-ion, 3.7V (Item No. 500985) P5R Work: 14500 Li-ion, 3.7V (Item No. 500985) Rechargeable batteries may only be charged at temperatures from 10°C to 40°C. Lanyard Intelligent Clip Adapter User Manual P5R Core | P5R Work V.01 06.2021... -
Page 5: Warning
Rechargeable batteries may only be charged at temperatures of 10°C to 40°C. Optionally, the batteries can be removed from the lamp and charged externally green green blink with a suitable charger. User Manual P5R Core | P5R Work V.01 06.2021... -
Page 6: Battery Replacement
„Memory Mode“ is deactivated, the lamp always starts with the same light function. The „Memory Mode“ Low Power can be activated and deactivated in the advanced settings (10). <3s Mid Power <3s Power User Manual P5R Core | P5R Work V.01 06.2021... -
Page 7: Boost Function
When the „Low Battery Warning“ is active, which can be activated or deactivated in the advanced settings, Backup the lamp gives a flashing signal every 15 minutes when the battery capacity is low. User Manual P5R Core | P5R Work V.01 06.2021... -
Page 8: Customizing Light Modes
These can now be activated 3x blink in the selected order by tapping the switch several times within three seconds after switching the lamp on. Strobe SAVE & EXIT User Manual P5R Core | P5R Work V.01 06.2021... -
Page 9: Additional Functions
2x red blink: Emergency Mode OFF This means that the lamp comes on automatically in the event of a power failure or is immediately active when it is removed from the holder. User Manual P5R Core | P5R Work V.01 06.2021... -
Page 10: Reset To Factory Settings
Then press the switch again for five seconds until it flashes four times. Now release the switch. The lamp has been reset to the factory settings and can be used 4x green blink: Reset again as usual. User Manual P5R Core | P5R Work V.01 06.2021... -
Page 11: Further Information
Simply scan the QR code or visit www.ledlenser.com. P5R Core P5R Work ledlenser.com Ledlenser GmbH & Co. KG Kronenstr. 5-7, 42699 Solingen Phone +49 212/5948-0 Fax +49 212/5948-200 info@ledlenser.com User Manual P5R Core | P5R Work V.01 06.2021...
Need help?
Do you have a question about the P5R CORE and is the answer not in the manual?
Questions and answers