Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ledlenser P6R WORK
Summary of Contents for ledlenser P6R WORK
- Page 1 USER MANUAL P6R WORK P7R WORK...
- Page 2 Therefore, pay particular attention to the warning and safety instructions and properly dispose of the lamp, batteries and packaging material. P6R Work P7R Work User Manual P6R Work | P7R Work V.01 06.2021...
-
Page 3: Table Of Contents
Please register your product with the 12. Further Information enclosed registration card to obtain an extended warranty, check the authenticity of the product and receive updates about products or product improvements. User Manual P6R Work | P7R Work V.01 06.2021... -
Page 4: Scope Of Delivery
P6R Work: 18650 Li-ion, 3.7V (Item No. 501001) P7R Work: 21700 Li-ion, 3.7V (Item No. 502262) Rechargeable batteries may only be charged at temperatures from 10°C to 40°C. P6R Work Pouch Lanyard Intelligent Clip + Lamp Adapter User Manual P6R Work | P7R Work V.01 06.2021... -
Page 5: Warning
Rechargeable batteries may only be charged at temperatures of 10°C to 40°C. Optionally, the batteries can be removed from the lamp and charged externally with a suitable charger. User Manual P6R Work | P7R Work V.01 06.2021... -
Page 6: Battery Replacement
If the „Memory Mode“ is deactivated, the lamp always <3s starts with the same light function. The „Memory Mode“ can be activated and deactivated in the advanced Low Power settings (10). User Manual P6R Work | P7R Work V.01 06.2021... -
Page 7: Boost Function
When the „Low Battery Warning“ is active, which can be activated or deactivated in the advanced settings, Backup the lamp gives a flashing signal every 15 minutes when the battery capacity is low. User Manual P6R Work | P7R Work V.01 06.2021... -
Page 8: Customizing Light Modes
These can now be activated 3x blink in the selected order by tapping the switch several times within three seconds after switching the lamp on. Strobe SAVE & EXIT White User Manual P6R Work | P7R Work V.01 06.2021... -
Page 9: Additional Functions
2x red blink: Emergency Mode OFF This means that the lamp comes on automatically in the event of a power failure or is immediately active when it is removed from the holder. User Manual P6R Work | P7R Work V.01 06.2021... -
Page 10: Reset To Factory Settings
Then press the switch again for five seconds until it flashes four times. Now release the switch. The lamp has been reset to the factory settings and can be used 4x green blink: Reset again as usual. User Manual P6R Work | P7R Work V.01 06.2021... -
Page 11: Further Information
Simply scan the QR code or visit www.ledlenser.com. P6R Work P7R Work ledlenser.com Ledlenser GmbH & Co. KG Kronenstr. 5-7, 42699 Solingen Phone +49 212/5948-0 Fax +49 212/5948-200 info@ledlenser.com User Manual P6R Work | P7R Work V.01 06.2021...
Need help?
Do you have a question about the P6R WORK and is the answer not in the manual?
Questions and answers