M-Audio Oxygen Pro Mini User Manual page 44

DAW/Preset Button
Editing the DAW/Preset button requires pressing and holding the SHIFT button and pressing
the DAW/Preset button. You can then scroll through the available parameter values using the
Encoder. Select what parameter you would like to edit by pressing the Encoder.
Note: What some parameter values are set to will affect what parameters are available for
editing. For example, if the Button's Mode parameter is changed from Mackie to CC, it will
change the editable parameters to CC parameters.
Channel: The DAW/Preset button will send its messages over this channel. Select the global
channel (Global), or a specific channel (Channel 1–16).
Available Values: Global, 1-16
Assignment "ASSIGN":
•
Mackie "MACKIE": When set to Mackie Control, you can use the button with a DAW that
responds to Mackie Control mode. This will not send a message when this is selected.
•
Mackie/HUI "MACK/HUI": When set to Mackie/HUI, you can use the button with a DAW
that responds to HUI mode. This will not send a message when this is selected.
•
CC "CC": The button will send its MIDI messages using this CC number.
When set to CC, these are the available parameters:
CC: The DAW/Preset button will send its MIDI messages using this CC number.
Available Values: 0-127
44