M-Audio Oxygen Pro Mini User Manual page 36

DAW Edit Mode
When SHIFT is pressed and held and the DAW/PRESET button is pressed, it will enter into
editing the Preset or User DAW. Press the Encoder on "DAW" and the DAW controls will be
available for editing.
The default parameter to be edited will be the current User DAW's Fader 1 assignment.
However, once a different control is moved, or pressed, for example Knob 1, it will activate
that selected control for editing.
Storing a User DAW
To store a User DAW:
1. Press SHIFT and the DAW/Preset button to enter Edit Mode. The OLED will display
"EDIT" in the top row, and depending on the current DAW/Preset mode selection, will have
Preset or DAW highlighted in the second row.
Note: When Preset or DAW is highlighted you can turn the Encoder to change from
editing DAW or Preset mode, changing the current selection.
2. Press the Encoder to enter into either DAW or Preset edit mode.
3. Edit a control.
4. Press the DAW/Preset button.
5. The display will show "SAVE?" with the following selections available.
•
Cancel: Selecting Cancel will revert any changes made.
•
Replace: Selecting Replace will write over the currently selected preset.
•
Save As: Selecting "Yes" to Save As enable you to edit/change what the DAW's
name "NAME" is. The last available selection in the Save As screen is Save. Pressing
"Yes" on the Save screen will save your new User DAW.
Note: When editing a DAW name, use the Shift button and the Encoder to scroll to the letter
you want to edit and release the Shift button to select the current letter. To erase a letter in a
DAW name, press SHIFT and the Back button.
Fader
To edit the Fader control when in DAW Edit Mode, move the Fader. You can scroll through the
available parameter values using the Encoder. Select what parameter you would like to edit by
pressing the Encoder.
Channel: The Fader will send its messages over this channel. Select the global channel
(Global), or a specific channel (Channel 1–16).
Available Values: Global, 1-16
Message "MESSAGE":
•
Mackie "Mackie": When set to Mackie Control, you can use the fader with a DAW that
responds to Mackie Control mode.
•
Mackie/HUI "MACK/HUI": When set to Mackie/HUI, you can use the fader with a DAW
that responds to HUI mode.
•
CC "CC": The fader will send its MIDI messages using this CC number.
36