M-Audio Oxygen Pro Mini User Manual page 18

Preset Mode
•
Off/No LED: Fader Buttons will activate the following options:
ARP On/Off, ARP Edit Enter/Exit
o
ARP Latch On/Off
o
Chord On/Off, Chord Edit Enter/Exit
o
Scales On/Off, Scales Edit Enter/Exit
o
•
MIDI/Mode LED lit: Fader Buttons will send predetermined MIDI messages when in a
factory preset, or any user assignable MIDI message when in the user presets.
ARP and ARP LATCH Control
On the Oxygen Pro Mini, when this button is pressed, it will activate the keyboard's internal
arpeggiator. The arpeggiator's rate is based on the current Tempo and Time Division settings
– Tempo settings are editable using the Tempo button. Time Division settings can be
accessed by pressing and holding the Note Repeat button and turning the Encoder or by
pressing and holding the Shift button, and pressing Pads 5 - 8.
To activate the ARP Latch functionality on the Oxygen Pro Mini, press the ARP Latch button.
If the ARP button is active, then the ARP button will be lit to show that the ARP is active. If
ARP Latch is active the ARP Latch button will be lit.
Note: You can also sync the Arpeggiator to either the current Tempo's BPM setting, or an
external MIDI Clock source. The clock source can be edited in Preset Edit Mode and
selecting/pressing the Tempo button. Arpeggiator functionality is available in the 2 keyboard
modes, DAW, PRESET.
18