Vaniman SANDSTORM MOBILE Original Instructions Manual

Vaniman SANDSTORM MOBILE Original Instructions Manual

Micro-abrasive blasters
Hide thumbs Also See for SANDSTORM MOBILE:

Advertisement

CAUTION:
1. CONDITIONS FOR USE
This micro abrasive blaster may only be operated:
• Indoors;
• Below 1981 m (6500 ft) above sea level altitude;
• Ambient air temperature between 40°-105°F (5-40°C);
• Maximum relative humidity of 80% at 31°C (88°F);
• Power supply current fluctuations does not exceed 10% of nominal value;
• Under level 2 contamination conditions;
• Supply cool, dry air only, at a maximum pressure of 10.3 Bar (150 PSI).
2. SAFETY
WARNING:
with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
BATTERY-operated (cordless) power tool.
1.
Work area safety:
a.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b.
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust
or fumes.
c.
Keep children and bystanders away while operating this power tool. Distractions can
cause you to lose control.
2.
Electrical Safety:
a.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is earthed
or grounded.
c.
Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
d.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
25799 Jefferson Ave.
Murrieta, CA 92562
ORIGINAL INSTRUCTIONS
Read the instructions before using this equipment
Read all safety warnings, instructions, illustrations and specifications provided
1-800-VANIMAN (826-4626) USA
SANDSTORM EDGE
ENGLISH
www.vaniman.com
sales@vaniman.
SANDSTORM EDGE - 05/21 Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SANDSTORM MOBILE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vaniman SANDSTORM MOBILE

  • Page 1 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. 25799 Jefferson Ave. Murrieta, CA 92562 1-800-VANIMAN (826-4626) USA www.vaniman.com sales@vaniman.  ...
  • Page 2: Personal Safety

    Such preventive safety measures reduce the risk of starting the power tool accidentally. 25799 Jefferson Ave. Murrieta, CA 92562 1-800-VANIMAN (826-4626) USA www.vaniman.com sales@vaniman.  ...
  • Page 3 • Maintain equipment and accessories. Check for breakage of parts and any other condition that may affect the equipment’s operation. 25799 Jefferson Ave. Murrieta, CA 92562 1-800-VANIMAN (826-4626) USA www.vaniman.com sales@vaniman.   ...
  • Page 4: Liability Exclusion

    4. LIABILITY EXCLUSION Vaniman Manufacturing shall be absolved from all claims for damages and warranty if: • The product is used for any purpose other than it was designed for.
  • Page 5: Packing List

    1/4" (6mm) ID (inside diameter) hose while the IO/Master units come equipped with a quick disconnect fitting for a 1/4" (6mm) OD (outside diameter) air line. All Vaniman units are shipped with both fittings included to meet the customer's needs. For more help on connecting your unit to an air supply visit: www.vaniman.com/air-supply-connections-blasters/...
  • Page 6: Maintenance

    PN: 10209 MAINTENANCE Vaniman blasters are designed to be low maintenance. However, as the materials used in a microblaster are abrasive by design, components do wear out. A few minor areas should be maintained regularly for a long product life.
  • Page 7: Glass Window

    Replace when necessary. Moisture: Vaniman blaster regulators include a filter for small amounts of oil and moisture. If moisture causes the media to clump or cake in the tanks, improper media flow will result. Be sure the air supply is relatively oil and moisture free.
  • Page 8 - SandStorm XL & Problast 4ft. Handpiece Assembly* 97959 - SandStorm Prestige & Problast 3 6ft. Handpiece Assembly* 98109 - SandStorm Mobile & Mobile Problast *Does not include o-ring or tip BLASTER TIPS Recommended Tank Assembly Recommended Vaniman Tip Type Part No.
  • Page 9 Cuff (black cloth) Manguito (tela negra) Manchette (tissu noir) Manicotto (tessuto nero) Tuch) 140 N. Brandon P.O. Box 74, Fallbrook, CA, USA 92088 1-800-VANIMAN (826-4626) USA www.vaniman.com    15 2030A Window Gasket Kit Kit para Junta de Ventanas Kit joint statique fenêtre...
  • Page 10 MICRO-ABRASIVE BLASTERS PLUMBING SANDSTORM MOBILE SANDSTORM MOBILE IO SANDSTORM PROFESSIONAL SANDSTORM EDGE SANDSTORM 2 Air in De aire Luft in Ingresso Aria Foot Pedal Pedal de pie Pédale Fußpedal Pedale Dust Puerto del Collecteur de Staubsammler Porta Raccogli Collector colector de poussière...

Table of Contents