Reef Crest Random Mode; Additional Modes - Vortech MP60 Setup Manual

Reef Crest Random Mode

Additional Modes

All modes are set to default duration,
speed or percentage of speed. Refer
to the full manual to learn how to
customize these modes.
1 6
Reef Crest Random Mode simulates a high-energy reef
environment. It is indicated by both a yellow control
dial and the first two blue LEDs illuminated. The control
dial is used to set the maximum pump speed during
this mode. The pump will change speed frequently and
drastically to simulate crashing waves and surging tide.
FEED MODE
Press and hold the MODE
button for 3 seconds to
enter Feed Mode. The
control dial will blink white and the
pump will spin very slowly for 10
minutes (default setting) and then
resume its set mode.