Page 1
XX301-20-00 Vicon Industries Inc. Tel: 631-952-2288) Fax: 631-951-2288 Vicon Industries Inc. does not warrant that the functions contained in this equipment Toll Free: 800-645-9116 will meet your requirements or that the operation will be entirely error free or perform 24-Hour Technical Support: 800-34-VICON precisely as described in the documentation.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EX- POSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful inter- ference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
1. Overview Package Contents The device package contents consist of the following: Note Please check all components involved. Table 1-1 Package contents Name Name SATA cable DC Power Adapter & Power cord SATA power cable Mouse HDD fixing screw Quick guide Part Description Each part is listed in the below: Figure 1-1 Name and Connection of each front section...
Page 6
Table 1-3 Name and Function of rear section of 16ch DVR Name Function Audio In Camera audio input port Video In Camera video input port CVBS CVBS output port (depending on device types) VGA output port HD Output HD output port Network connector Network Alarm In/Out...
Installation This chapter describes how to install the DVR. When installing a device, connect each port on the rear of the device according to the connection diagram below. Figure 2-1 Connection map The installation steps should be done in the sequence below: 1 Installing HDD 2 Connecting to an exterior device 3 Starting a system...
Starting System Supplying power starts the system operation as follows: 1 Switching on initializes the icons below in order. Note Installing new HDD might take more initialization time. 2 When the buzzer sounds, the start screen displays. 3 In Log in screen, enter the ID, Password and press OK. Note Default ID &...
Page 9
Setting Quick Setup 2.3.1 Account 1 Set ID and Password. ▪ Default ID/Password is ADMIN/1234. Note ▪ Change the password for security. 2.3.2 System 1 Set each item in System setting screen. System Mode: Select input video type (Analog Only or Analog+IP cam) ...
Page 10
2.3.3 Network 1 Set each item in Network setting screen. WAN Port: Select whether to use static IP or dynamic IP. IP Address, Subnet Mask, Gateway, DNS, and Port: For dynamic IP, enter information in each field. 2.4.4 Time/Date 1 Set each item in Time/Date setting screen.
Live Screen Configuration UI screen is configured like figure below. Figure 3-1 UI Screen Configuration Table 3-1 Items and Description of UI Screen Configuration Item Description Setting menu Setting menu is located in the top corner of screen. See “Setup ” for detailed information about the setting menu.
Icons in Live screen Each icon in the Live screen displays the present setting status of a function. UI screen consists of icons as shown below. Chosen Live screen is marked as a blue frame; mouse-located live screen is marked Note as yellow one.
Live Launcher menu This chapter describes the Launcher menu at the bottom of the screen. Figure 3-3 Launcher menu Table 3-3 Launcher menu Item and Description Item Description Log in/out status and logged in ID Date & Time Displaying present date and time Displaying HDD capacity in use Moving to previous/next partition screen Displaying Live screen in order set (toggle)
Quick menu This chapter explains the Quick menu when users click the right button of the mouse in Live screen. Figure 3-4 Quick menu Table 3-4 Quick menu Item and Description Item Description Screen Mode Select the partition mode of Live screen (Full, 2X2, 3X3, and 4x4). Zoom in Magnify selected Live screen (Zoom out, 2 times, 4 times and 8 times).
Setup menu This chapter describes Setup menu at the top of the screen. Figure 4-1 Setup menu Selecting the menu opens the setup screen. Setup screen is also available by selecting Setup in Quick menu, accessed by Note clicking the right button of the mouse. Figure 4-2 Setup menu screen Table 4-1 Setup menu Item and Description Item...
Need help?
Do you have a question about the 301-20-00 Series and is the answer not in the manual?
Questions and answers