Zeegma Zonder Robo Vision User Manual page 11

•
When the battery goes flat during cleaning, the product automatically switches into
charging mode and goes to the docking station to initiate charging.
•
Activate the charging mode with the return-to-docking-station key on the remote
control or via the application.
Charging notes:
1.
The docking station must not be used in a direct sunlight.
2.
Before you start using the product, remember to fully charge it. Charging takes 4 hours.
3.
When charging, do not fix the water tank in the product to make sure the charging is safe.
Description of vacuuming modes and functions:
1.
Automatic vacuuming: activate the main switch of the product. When the control light
goes on, the product is active. Press start/pause key on the cleaner or remote control
and the cleaner will start vacuuming automatically.
2.
Spot vacuuming: press the spot vacuuming on the remote control to start cleaning.
3.
Edge vacuuming: press the edge vacuuming key on the remote control to start cleaning.
4.
Manual control: use remote control keys to choose direction of cleaner's movements
(forward, backward, left and right).
5.
Suction power adjustment: choose 1 of 3 suction powers. Press the suction power
adjustment key on the remote control or in the application, every time you press the
key, you change the aforesaid power.
Options:
•
Pause: when the cleaner operates, press start/pause key on the cleaner, remote control
or in the application to stop its operation.
•
„Wake up": The cleaner will go to sleep if it remains inactive for 10 minutes. To „wake
it up", press any key on the cleaner, remote control or in the application.
•
Deactivation: to switch the cleaner off, press start/pause key and hold for a couple of
seconds or deactivate the main switch on the product.
•
When the work is done, direct the vacuum cleaner into the docking station to charge it.
4a. How to install the water tank:
Description of parts (see fig. 10):
1.
Water inlet hole
2.
Water tank
3.
Mop
EN