Table of Contents
Advertisement
1. Important
Do not make any adjustments and modifications that are
not described in this manual. Follow all safety instructions
to ensure proper operation of the device. The manufacturer
assumes no liability for damages resulting from non-com-
pliance with the safety instructions.
Safety instructions
• Protect the device from rain and liquids to prevent dam-
age to the device or a short circuit.
• Do not expose the device to excessive heat caused by
placing it on a heating device or in direct sunlight.
• Protect the cables from damage by being trapped, partic-
ularly at the plugs and where cables exit the housing.
• Do not perform any maintenance operations that are not
described in this user manual. Do not disassemble the
device into its component parts to carry out repairs. The
device may only be repaired in authorized service centers.
• All wireless devices may be susceptible to interference,
which could affect performance.
• Back up your data and recordings. The manufacturer's
warranty does not cover loss of data resulting from user
actions.
SpeechMike Barcode
CAUTION
Class 1 laser product
This product complies with:
• 21CFR1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated July 26,
2001.
• EN60825-1:1994 + A1:2002 + A2:2001
• IEC60825-1:1993 + A1:1997 + A2:2001
The laser classification is marked near the scan-
ner window on the product.
Class 1 Laser devices are not considered to be hazardous
when used for their intended purpose. The following state-
ment is required to comply with US and international regu-
lations:
View this user manual
online:
help.speechmike.com/
lfh3200
CAUTION
Do not try to open the unit. Allow only authorized
service technicians to repair the unit. Use of con-
trols, adjustments or performance of procedures
other than those specified herein may result in
hazardous laser light exposure.
Small children
Your device and its accessories may contain small parts.
Keep them out of the reach of small children.
Compliance with EMF
Koninklijke Philips N.V. manufactures and sells many prod-
ucts targeted at consumers, which, like any electronic appa-
ratus, in general have the ability to emit and receive electro-
magnetic signals. One of Philips' leading Business Principles
is to take all necessary health and safety measures for our
products, to comply with all applicable legal requirements
and to stay well within the EMF standards applicable at the
time of producing the products. Philips is committed to de-
velop, produce and market products that cause no adverse
health effects. Philips confirms that if its products are han-
dled properly for their intended use, they are safe to use
according to scientific evidence available today. Philips
plays an active role in the development of international
EMF and safety standards, enabling Philips to anticipate
further developments in standardisation for early integra-
tion in its products.
Cleaning and disinfection
• Before cleaning, disconnect all cables from the device.
• To clean the device, use a soft dry cloth.
• To disinfect the device, use products for disinfection of
surfaces in clinical areas and patient care equipment,
such as surface disinfectant wipes.
• Do not use harsh chemicals or strong detergents.
• Avoid getting moisture in openings.
• Do not rub or strike the surface with anything hard or
sharp as this may scratch or damage the surface perma-
nently.
Disposal of your old product
A crossed-out wheeled bin symbol attached to a product
indicates that the product is covered by the European Di-
rective 2011/65/EU. Please get informed about the local
separate collection system for electrical and electronic
products. Please act according to your local rules and don't
dispose of your old products with your normal household
waste. Correct disposal of your old product helps to prevent
3
Advertisement
Table of Contents
