URBANGLIDE C5 User Manual page 6

1. Unfold the bicycle frame fully
2. Tighten the opening of the frame with the quick release at the bottom bracket
3. Unfold the pedals
4. Raise the handlebars then close using the hinge
Be careful not to pinch your fingers during the above steps.
- First of all, make sure that the battery is inserted in the slot provided for this purpose under the saddle (to
access it, press the lever at the back of the saddle, lift the saddle and rotate it).
- Insert and turn the key in the slot provided for this purpose on the battery to turn it on.
- Turn on the control screen by pressing the Power button.
- Get on the bike and start pedaling, the electric assistance will start to help you, control your speed on the
screen, if you exceed 25km/h or if you stop pedaling the electric assistance will automatically deactivate for
your safety.
- When you are not on the bike, put it to "OFF" by pressing the Power button for 3 seconds.
Presentation of the general
Getting Started
Start and use
1 Derailleur
2 Rear wheel
3 Rear disc brake
4 Engine
5 Rear reflective light
6 Battery
7 Seat lock
8 Seal
9 Channel
10 Gallows
11 Handlebar lock
12 Handle
13 Display screen
14 Front light
6