URBANGLIDE C3 User Manual page 7

3. Fold out the pedals
4. To operate the rear LED, remove it and insert two batteries. To turn it on, press the button on top
of the LED.
Press once to switch to the fixed position
Press a second time to switch to the flashing position.
Press a third time to switch off the LED.
- First, insert and turn the key into the key slot on the battery to turn it on.
- Turn on the control panel by pressing the Power button.
- Get on the bike and start pedalling, the electric assistance will start to help you, check your speed on the
screen, if you exceed 25km/h or if you stop pedalling the electric assistance will automatically deactivate
for your safety.
- When you are not on the bike, turn it to "OFF" by pressing and holding the Power button for 3 seconds.
- Then turn off your bike's battery by turning and removing the key from your battery .
Switching on and use
7