Epson L300 Start Here page 3

L300
Start Here
1
Unpack
Note: The included ink bottles must be used for product setup and are not for resale.
2
Fill ink tanks
Note: This product requires careful handling of ink. Wear plastic gloves and place a sheet
of paper under the ink tank unit when you fill or refill the ink tanks, as ink may splatter. If
ink spills, wipe it off immediately to avoid permanent stains. If ink gets on your clothes or
belongings, it may not come off.
Be sure to set the transportation lock to the
printing position, otherwise ink will not be
delivered and print quality problems may occur.
During initial setup, make sure to use the ink bottles that came
with your product and use all of the ink.
Fill each tank with the correct ink color.
3
Load paper
Read these instructions before using your product.
Caution: Do not open the ink bottles until you are ready to fill the ink tanks. The ink bottles are
vacuum packed to maintain reliability.
Warning: Keep ink bottles out of the reach of children and do not drink the ink.
Turn on the printer, then press the
until the power light starts flashing. Ink charging takes
approximately 20 minutes. Ink charging is complete when the
power light stops flashing.
Caution: Replace bottle cap tightly, or
ink may leak.
/
button for 3 seconds