Table of Contents
Advertisement
9. A N A LY S E R S E T T I N G S | 1 0 . U S I N G T H E S D C A R D
9.3
Backlight settings
To alter the backlight setting on the analyser, select the Analyser Settings option from the main menu, then in the analyser settings screen, select the
Backlight option.
In the backlight screen, the first menu item allows you to change the backlight level; the second one enables/ disables the backlight auto shutdown, where the
backlight is turned off after 15 seconds of inactivity, to save battery power. Press OK to save the settings.
9.4
Automatic shutdown
The SoToxa Mobile Analyser can be set to automatically shutdown after a period of inactivity to save power. The automatic shutdown function can be set to on
or off and the time period before shutdown can be selected.
Select Analyser Settings from the main menu, then in the Analyser Settings screen, select Auto Shutdown. In the Auto Shutdown screen, use the five way
navigation key to highlight the required setting and press OK to save the setting.
The analyser will not automatically shutdown while a test is in progress or if a cartridge is inserted.
10.
Using the SD Card
The SoToxa Mobile Analyser has a microSD card slot. Refer to section 2.1 SoToxa Mobile Analyser at a glance for the location of the SD card cover panel. The
SD card socket can only be accessed by unscrewing the SD card cover panel. For this a small Phillips head screw driver is needed. This tool is not supplied with
the SoToxa Mobile Test System. Please contact Product Support if access to the SD card is required.
The SD card can be used for applying firmware updates to the analyser, adding new test cartridge types or versions to the analyser and exporting of diagnostic
data from the analyser to the card.
21 | EN
S O T O X A™ M O B I L E A N A LY S E R | U S E R G U I D E
Advertisement
Table of Contents
