Camshaft Specifications - Toro LC1P65FC Service Manual

Camshaft Lobe Specifications
Standard
1.0905"
Intake
(27.7 mm)
1.0937"
Exhaust
(27.78 mm)
NOTE: If this measurement is out of specification, complete engine replacement is required.
The only internal parts available for this engine are gaskets and seals.
Camshaft Journal OD
Standard
0.5505"
(13.984 mm)
Check the camshaft bearing journal for scoring, wear or damage.
NOTE: Verify that the decompression mechanism moves freely.
NOTE: If this measurement is out of specification, complete engine replacement is required.
The only internal parts available for this engine are gaskets and seals.
Service Limit
1.0807"
(27.45 mm)
1.0826"
(27.50 mm)
Service Limit
0.5478"
(13.916 mm)
36