Crankshaft Specifications - Toro LC1P65FC Service Manual

Crankshaft pin OD
Standard
1.0228"
(25.98 mm)
NOTE: If this measurement is out of specification, complete engine
replacement is required. The only internal parts available for this engine
are gaskets and seals.
Connecting Rod Big End Side Clearance
Standard
0.00393 - 0.02755"
(0.1-0.7 mm)
NOTE: If this measurement is out of specification, complete engine
replacement is required. The only internal parts available for this engine
are gaskets and seals.
Connecting Rod Big End Oil Clearance
- Clean oil from the crankshaft and connecting rod.
- Use plastic gauge style measuring tool in accordance to the
manufactures instructions to measure the oil clearance.
Connecting Rod Bolt Torque: 9.5 ft-lbs (13 Nm
Standard
0.0015 – 0.0024"
(0.040-0.063 mm)
NOTE: If this measurement is out of specification, complete engine replacement is required.
The only internal parts available for this engine are gaskets and seals.
Service Limit
1.0204"
(25.92 mm)
Service Limit
0.0433"
(1.1 mm)
Service Limit
0.0047"
(0.120 mm)
)
35
3