Download Print this page

Sensor Reception; Mount Temperature Sensor; Position Clock; Specifications - La Crosse Technology 513-1417CH Manual

Atomic digital clock with temperature and moon phase
Hide thumbs Also See for 513-1417CH:

Advertisement

Help Us, Help You!
If you have ideas for features or support solutions you'd like to see us
make, please let us know! We truly want to make owning a La Crosse
Technology product not only a practical experience, but also a fun
one. So email us at:
store@lacrossetechnology.com
Let's Be Social!
Follow us on our social media outlets for the latest promotions,
product support, and awesome giveaways.

Sensor Reception

Hold the - button 3 seconds to search for the sensor.
The strength signal icon will flash until the sensor signal is received
or for 3 minutes if no signal available.
The signal will show solid when connected to the sensor.
Low Battery Icon
Battery icon by time-Change batteries in the clock.
Battery icon by outdoor temperature-Change batteries in the sensor.

Mount Temperature Sensor

• Mount the outdoor sensor on a north-facing wall or in any
well-shaded area. Under an eave or deck rail is preferred.
• The maximum wireless transmission range to the forecast station is over 300 feet
(91 meters) in open air; this does not include barriers such as walls or floors.
• Be sure the outdoor sensor is mounted vertically.
WARNING: This product can expose you to chemicals including styrene, which
is known to the State of California to cause cancer. For more information go to:
www.P65Warnings.ca.gov
Page | 5
www.lacrossetechnology.com/support

Position Clock

The clock has a pullout stand to sit on a desk or table, or openings on the back to
mount on a wall.
For best Atomic time reception orientate the clock with the front or the back
facing Ft. Collins, Colorado.
Choose a location 6 feet or more from electronics such as cordless phones,
gaming systems, televisions, microwaves, routers etc.
Place within range of the outdoor sensor (330 feet open air).
Restart
When the outdoor readings show dashes:
• Bring the sensor in the house five feet from the station.
• Remove batteries from the sensor, and the batteries from the clock.
• Press any button 20 times.
• After 15 minutes insert batteries into the sensor, and into the clock.
• Wait 15 minutes to establish a strong connection.
• Place sensor outside in shaded location.

Specifications

Indoor Temperature Range: 32°F to 122°F (0°C to 50°C)
Outdoor Temperature Range: -40°F to 140°F (-40°C to 60°C)
Transmission Range:
Over 300 ft. (91 meters) RF 433MHz (open air)
Power Requirements:
513-1417CH - 2 AA batteries (not included)
TX141-Bv3 - 2 AA batteries (not included)
Battery Life:
513-1417CH-over 12 months
TX141-Bv3-over 12 months
Dimensions:
513-1417CH- 11.10" W x 1.14" D x 6.75" H
TX141-Bv3- 1.57" L x 0.79" W x 5.12" H
513-1417CH
513-1417CH
(28.19 W x 2.89 D x 17.15 H cm)
(3.98 L x 2.0 W x 13.0 H cm)
www.lacrossetechnology.com/support
Page | 6

Advertisement

loading