Table of Contents
Advertisement
The outdoor temperature (2°F / 1°C) trend indicators update every 30 minutes or less. This provides a 3 hour
comparison which changes on every ½ hour:
Example: At 3:00 - compare to 12:00 data; at 3:30 -compare to 12:30 ..... etc.
Temperature rose over
the past 3 hours
• Hold the - button 3 seconds to search for the sensor.
• The strength signal icon
available.
• The signal will show solid when connected to the sensor.
When the outdoor readings show dashes and searching for the sensor has not helped, complete a full
restart:
1. Bring the sensor in the house about five feet from the clock.
2. Remove batteries from the sensor, and from the clock
3. Press any button 20 times.
4. After 15 minutes, insert batteries into the sensor, and into the clock.
5. Wait another 15 minutes to establish a strong connection. Place sensor outside in shaded location.
• A Low Battery Indicator by the time means you need to replace the batteries in your station.
• The Sensor Weather Shield (sold separately) is designed to protect your outdoor sensor
from rain and snow.
• This shield will offer limited protection from the sun's heat.
• Optional purchase at:
ATO M IC D IG ITAL C LO CK
T E M PE R AT U RE T R END A RROWS
Temperature is unchanged
over the past 3 hours
O UT D OOR S E NS OR REC EPTI O N
will flash until the sensor signal is received or for 3 minutes if no signal is
FACTO RY RE STA RT
LOW B AT TERY I NDI CATOR S
SE N SO R W EAT H E R S H I E L D
bit.ly/925-1418
Temperature fell over
the past 3 hours
8 | PAGE
Hide quick links:
Advertisement
Table of Contents
