Outdoor Sensor Reception; Factory Restart; Low Battery Indicators; Sensor Weather Shield - La Crosse Technology 513-149V2 Instruction Manual

• Hold the - button 3 seconds to search for the sensor.
• The strength signal icon
available.
• The signal will show solid when connected to the sensor.
When the outdoor readings show dashes and searching for the sensor has not helped, complete a full
restart:
1. Bring the sensor in the house about five feet from the clock.
2. Remove batteries from the sensor, and from the clock
3. Press any button 20 times.
4. After 15 minutes, insert batteries into the sensor, and into the clock.
5. Wait another 15 minutes to establish a strong connection. Place sensor outside in shaded location.
• When the Battery Indicator
Sensor.
• When the Battery Indicator
• The Sensor Weather Shield (sold separately) is designed to protect your outdoor sensor
from rain and snow.
• This shield will offer limited protection from the sun's heat.
• Optional purchase at:
If you require additional support, get in touch with our friendly customer support team based out of La
Crosse, WI.
Phone: 1-608-782-1610
Online: bit.ly/contact_techsupport
Our knowledgeable customer support team is available: Monday-Friday, 8am-6pm CST.
ATO M IC D IG ITAL C LO CK
OUT D O OR S E NS OR REC EP TI O N
will flash until the sensor signal is received or for 3 minutes if no signal is
FACTO RY RE STA RT
LOW BAT T ERY I N DI CATO RS
shows next to the Outdoor Temperature, replace batteries in the Outdoor
shows next to the Indoor Temperature, replace batteries in your Clock.
SE N SO R W EAT H E R S H I E L D
bit.ly/925-1418
WE 'R E H E RE TO H EL P!
6 | PAGE