Touch Panel Marine Line
762-6xxx/8000-000x TP 600
Table 10: X5 Pin Assignment
Pin
1
2
3
4.4.7
"X6" and "X7" USB-2.0 Interfaces
The USB 2.0 host interfaces are designed with 4-pin type A sockets. Each
interface can supply max. 500 mA.
The connectors comply with the USB 2.0 specification.
Keyboards or mice can be connected as alternative input devices or up to 2 USB
memory devices. These USB devices must be connected before power ON.
4.4.8
"X8" – Line-out Audio Output (Headphones)
The audio output is a three-pole, 3.5 mm stereo socket. Headphones or a
compatible audio device can be connected to this socket, e.g. in order to output
acoustic warning signals or voice messages that the control application contains.
4.4.9
"X11" – Four Digital Inputs and Outputs DIO
(Only with PIO3 Hardware)
There are four digital connectors, configurable as inputs or outputs, for
connecting actuators and sensors.
A 10-pole picoMAX
(female connector 2091-1110).
Table 11: X11 Pin Assignment
CAGE CLAMP
1
2
3
4
5
6
7
8
9
10
The digital inputs/outputs are electrically isolated from the supply voltage of the
panel and from the other interfaces.
Description
24VDC
GND
FE
®
plug is used with 10 push-in CAGE CLAMP®S connections
®
Name
GND
DIO 0
GND
DIO 1
GND
DIO 2
GND
DIO 3
GND
24VDC
Assignment
Supply voltage: +24 VDC
Reference potential 0V (ground)
Functional earth
Assignment
Reference potential 0 V (ground)
Digital I/O 0
Reference potential 0 V (ground)
Digital I/O 1
Reference potential 0 V (ground)
Digital I/O 2
Reference potential 0 V (ground)
Digital I/O 3
Reference potential 0 V (ground)
Supply voltage for digital inputs and outputs
Properties
35
Manual
Version 1.1.0