Stihl MS 171 Instruction Manual page 51

Rollomatic E Light and Rollomatic E
guide bars
Cutting lengths: 30, 35, 40 cm
3/8" P
Pitch: (9.32 mm)
Groove width: 1.3 mm
Nose sprocket: 9-tooth
3/8" Picco chains
Picco Micro 3 (63 PM3) Type 3636
Picco Duro 3 (63 PD3) Type 3612
Picco Super 3 (63 PS3) Type 3616
Pitch: 3/8" P (9.32
mm)
Drive link gauge: 1.3 mm
Chain Sprocket
6-tooth for 3/8" P (spur sprocket)
Max. chain speed accord -
ing to ISO 11681:
Chain speed at maximum
power:
Noise and Vibration Data
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib.
Sound pressure level L to ISO 22868
p
MS 171:
MS 171 C:
MS 181:
MS 181 C:
MS 211:
MS 211 C:
MS 171, MS 171 C, MS 181, MS 181 C, MS 211, MS 211 C
Sound power level L
MS 171:
MS 171 C:
MS 181:
MS 181 C:
MS 211:
MS 211 C:
Vibration measurement a
ISO 22867
MS 171:
MS 171 C:
MS 181:
MS 181 C:
MS 211:
MS 211 C:
The K - factor in accordance with
24.8 m/s
Directive 2006/42/EC is 2.0 dB(A) for
the sound pressure level and sound
18.6 m/s
power level; the K - factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration level.
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
99 dB(A)
For information on compliance with the
99 dB(A)
REACH regulation (EC) No. 1907/2006
100 dB(A)
see www.stihl.com/reach.
100 dB(A)
100 dB(A)
100 dB(A)
to ISO 22868 Exhaust Emissions
w
112 dB(A)
The CO
112 dB(A)
approval procedure is specified at
112 dB(A)
www.stihl.com/co2.
112 dB(A)
The measured CO
113 dB(A)
determined on a representative engine
113 dB(A)
in accordance with a standardized test
procedure under laboratory conditions
to
and does not represent either an explicit
hv,eq
or implied guarantee of the performance
of a specific engine.
Handle, Handle,
The applicable exhaust emission
left right
requirements are fulfilled by the
2 2
4.0 m/s 4.5 m/s
intended usage and maintenance
2 2
3.5 m/s 3.5 m/s
described in this instruction manual. The
2 2
3.5 m/s 3.0 m/s
type approval expires if the engine is
2 2
3.5 m/s 3.0 m/s
modified in any way.
2 2
3.5 m/s 3.5 m/s
2 2
3.5 m/s 3.5 m/s
2
English
value measured in the EU type
2
value was
2
49