Connectivity - Adamson CS Series User Manual

S E R I E S

Connectivity

On-board Digital Signal Processing (DSP) is accessed via two data ports on
the rear of the cabinet. These ports are used to stream AVB audio as well
as transmit AES70 control data. All CS-Series loudspeakers are configured
to receive two separate LAN signals on a single data link. The CS Network
Distribution System (NDS, 905-0039) combines both LANs on one ethernet
cable. This approach allows network redundancy as well as the ability to
daisy-chain control data and digital audio between enclosures.
When using the NDS, up to six CS-Series loudspeakers can be
daisy-chained on a single network path. This quantity takes into account
the CS Gateway, the CS NDS, the network switches, as well as each CS
loudspeaker to determine the amount of latency created by each individual
hop, and ensuring the total latency remains within pre-determined
parameters. The audio signal latency between each CS7p is 0.26 ms, jump
to jump.
All CS-Series cabinets are Milan-ready. With Milan, every device will
automatically connect with any other Milan device using a variety of standard
formats and definitions in the protocol.
Each CS-Series loudspeaker is equipped with balanced XLR input and output
connectors for line level analog audio signals.
The CS7p's drivers are powered by a proprietary two channel Class-D
amplifier capable of providing up to 2400 W of combined power.
User Manual
1 IN
2 THRU
9